Home Tips & Tricks How to Clean Lights of your Home you are Living

How to Clean Lights of your Home you are Living

by LightHub

This post contains affiliate links. If you purchase from this website through links in this post, we receive a small number of commissions for purchases made. It helps us a lot to run this website.

Cleaning Lights you use in your home is an important part of your daily life. You might put your attention to your favorite smartphone, and diligently clean the corners of the phone on a regular base. But the lights of your home might go unattended from lack of cleansing. The cleaning lights of your home is a very important part of housekeeping. Lights are the consistent source of brightness in indoor situations and also in times of darkness. But more often than not we seem to be negligent to clean our house lights. But that certain part of the negligence needs to change. A clean lighting system ensures that you can get the best living conditions.

Cleaning for Electronics

Now the first thought that comes to our minds is that we need to clean electronics. It’s much more different than cleaning other things. Cleaning anything that has electricity connected to it is a danger in itself. You cannot have any water around and that’s a no-brainer. And cleaning lights are a whole new level of safety. A whole panel of electric connections goes through the lights into the main power source. Using any water or any substance can mean you are receiving bodily harm. So there are some cautionary steps you can take beforehand to clean the lights inside your house.

Safety Precautions of Light Cleaning

Now, safety is always a priority when doing any work. But as you are cleaning the lights of your house then you have to give many precautions. Because unlike your standard appliance, you may turn the switch off but you will still be connected to the whole contraption. So, you stand to do yourself significant harm by going in raw. Not knowing some things might have some mortal issues as well. So, when life and death is an issue, please take some steps ahead. There are three steps for you to take in terms of safety precautions.

Type of bulb:

Each lightbulb differs from each other. In installation or operation, you will find that bulbs differ from each other quite drastically. So know what type of bulb or light you are cleaning. The rooms in question might need specific types of lights. So depending on the use, system, and type of lightbulb, you need to take the proper precautions. Each type of bulb may have its type of wiring done. So make sure you get the proper bulb knowledge down before you start cleaning. Knowing a little bit can save you from large damage in the long run.

Type of Fixture:

Now your lights need their separate fixtures. Each type of lighting system has its type of lighting fixtures. It can be fixed ceiling fixtures, Chandeliers, lamps, and other types. But before getting into the cleaning, make sure that you clean and be careful about the various settings of the fixture. In a default way, you would be cleaning the fixture as well. So to save yourself from injury and save the lights themselves, you need to know your way around the type of fixture you are using. Knowing which fixture can get you a heads up on how you can approach the cleaning work.

Light Cleaning tools

Now that we have the cleaning precautions in motion, we have to think about what tools we are about to use. If you have the right tools with you then that’s the half job done. As we said before, cleaning lights can be a tricky business. It’s not as straightforward as taking a bucket of water and a mop and grinding away. There are safety precautions and you have to have a certain type of tool to help you with the overall process. There is a whole load of things you might use, but for now, there are some bare essentials that can get the job done.

Water: Make sure you have a spray bottle. You can’t apply a whole load of water onto the lights. A sprinkle will do just enough to clean the spots away and a water spray bottle does the job.

Screwdrivers: In a light cleaning session you need to have two screwdrivers at handy. Depending on the types of lights or fixtures, you need a flathead and Phillips head screwdriver for the job.

All-Purpose Cleaner: The type of cleaner that you can spray on and kill the small dust particles is what you need when it comes to deep cleaning needs.

Cloths: You need a small cleaning cloth and it has to be lint-free. On top of that, you need a dusting sheet as well.

Step by Step Light Cleaning

Now it’s time to get to the actual cleaning process. Now, each bulb or light has a different type of setting. Regardless of what type of lights you are cleaning, the overall process remains the same. These parts of the process always remain the same, but doing these steps is crucial for you to get a top to bottom clean lighting setup. The main steps include

Push the off button:

As a part of the precautions, we talked about how integral electricity is to the whole process. If one of the bulbs or holders have some electricity in them, then there could be a dire catastrophe. So to prevent any sort of casualties, turning off the power and the lights themselves is the first option. You have to make sure that none of the units are on at any time. Make sure the fixtures are also turned off. The fixtures also have a complex connection of the electrical parts. So, turn the buttons off and disconnect the devices from all power sources.

Additional Gear Removal:

If you have invested a lot of money on your light setup, then they will be surrounding the bulb. Shades, lamps, and other things are attached to the bulbs. So, remove whatever additional gear, frame, or components that are around the lights. That might depend on the type of fixture you use. If the fixture is a pendant, then taking the whole fixture down is a good idea. If it is a lamp then totally remove the additional components from the bulbs. This will allow you to solely concentrate on the bulbs. You can clean the shades and gears afterward separately.

Frame cleaning:

Once you have taken off all the components and turned off all the power, now it’s time for the proper cleaning to commence. The frame is an important part of the bulb. The bulb itself lets out the radiant beams through the frame. So essentially, the frame represents the visual aspect of the bulb. Now not every type of surface will have the same amount of cleaning effort. Each type of surface needs a separate type of cleaning effort. So next, we will discuss what type of cleaning material and what methods you can use for different surfaces. There are many types but let’s see the most prominent ones.

Tips for different surfaces

Glass: Any traditional type of bulb will always have a frame that is made with glass. In other cases, you might also see some frames of porcelain. As these are the most common surfaces for bulbs, they are fairly easier to clean. If you see deep layers of dust then it’s as easy as wiping the dust off of the surface. You can take a lint-free cloth and start just wiping away. If there are task lights for the kitchen or bathrooms then using a damp cloth might be a very good idea. For removable shades, washing with warm water is a very good option.

Crystal:

If you have an artistic taste in lighting, then you might have brought crystal surface lights. These lights are fine additions to your home and they bring about an aesthetic feel. So, when they get sooty and covered with dust, it breaks the overall feeling of beauty. But cleaning crystal surfaces are a bit more problematic. For that, you can use canned air. Canned air can clean the crystal frames quite well without leaving any smudges on the surface. There are special crystal cleaners for chandeliers that you can get in stores that help with crystal cleaning

Metal:

Now the frames of the lights are not fully metal. But there are always metal bits on the bulbs. Cleaning any metal object might be an annoying chore. A particular use of water on metal surfaces can cause rust in some instances. That is why you need to be careful when you are cleaning metal parts of the bulb. You can use the aforementioned lint-free cloth to clear out the smudges off of the metal. If there is an antiquated finish then you can also use water to clean the surface off. Metal cleansing is good enough like this if done right.

Paper or Fabric:

Now you might be thinking, how does a fabric or paper wind up on a bulb? The fixture or the additional parts of the light might have paper or fabric on them. So you need to clean these parts as well. These materials are under the most threat of accumulating dust for a long time. All-purpose cleaners can come in to clear out the dirt or dust from the paper or fabric of certain light. You can’t use the damp cleaning process, it might result in spots getting there permanently. So, make some exceptions while cleaning fixtures. Doing them separately might be a very good option.

Wood:

For vintage lights or lamps, it is quite easy to see wood in the making of lights. Many reading lamps, accent bulbs, and other types of task lighting can have wood in them. But there is also a problem attached to cleaning wooden fixtures. These fixtures can be cleaned in a similar way to the fabric. But be wary of the type of deep places where dust can accumulate. Be a bit more thorough while cleaning out wooden frames.

Plastic:

Plastic frames are quite problematic to clean. But in most cases, a lot of lights have plastic holders or other parts of the fixtures are made of plastic. Use a damp piece of clothing to steadily clean the plastic area of the frame.

Replacing Light Bulbs

In some cases, you can find that light bulbs are not working when you go to fix them. Make an express effort to make sure that you replace the lightbulbs. But don’t throw away dimming light bulbs. You can replace them and use them in darker places where dimmer lights fit the use

Final words
A small intention of cleanliness can mean a lot if you have the right steps. Cleaning lights of the home may not sound like rocket science but it can certainly be more effective if you follow the steps we have advised you with.


How useful was this post?

Click on a star to rate it!

Average rating 4.7 / 5. Vote count: 38

No votes so far! Be the first to rate this post.

You may also like

Leave a Comment